远东无损检测资讯网

标题: 2017远东论坛学术报告报名(第三批:第65-第100场) [打印本页]

作者: 远东网    时间: 2017-3-31 15:38
标题: 2017远东论坛学术报告报名(第三批:第65-第100场)
“2017远东无损检测新技术论坛”学术报告报名公告
(第三批:第65场至第100场)
自即日起分批公布已收到的2017远东无损检测新技术论坛学术报告报名,现将第三批65-100场学术报告的题目、报告人和所代表单位公布如下:
65、报告题目:光声放大的机理与实验(光声技术和超声检测)
报告人:王海涛
单位:南京航空航天大学

66、报告题目:大型储罐结构完整性无损检测一体化技术研究(石油管及装备无损检测技术专场)
Title of the report:Research on nondestructive testing for structural integrity of largestorage tanks
报告人:胡家顺博士
Reporter: Dr. Hu Jiashun
单位:中国石油集团安全环保技术研究院
UnitCNPC ResearchInstitute of Safety & Environment Technology

67、报告题目:组织指纹光声诊断技术-一种肿瘤筛查潜在技术(光声技术和超声检测)
报告人:程茜
单位:同济大学

68、报告题目:我国金属材料物理性能现场检测技术的现状与展望(残余应力专场)
报告人:李荣锋
单位:武钢研究院

69、报告题目:LCR波焊缝残余应力测试修正(残余应力专场)
报告人:苟国庆
单位:西南交通大学

70、报告题目:大直径薄壁高强铝合金结构件焊接残余应力超声调控技术应用研究(残余应力专场)
报告人:郑森木
单位:中国航天科技集团公司长征机械厂

71、报告题目:北京新机场钢结构焊接残余应力超声检测方法(残余应力专场)
报告人:郑刚兵
单位:华新检测技术研究院

72、报告题目:特种车辆关键元件残余应力对服役寿命的影响分析(残余应力专场)
报告人:洪振军
单位:内蒙古第一机械集团有限公司(兵器617厂)

73、报告题目:航空材料残余应力超声无损检测(残余应力专场)
报告人:王晓
单位:中国航发北京材料研究院(航空621所)

74、报告题目:激光选区熔化(SLM)成形构件残余应力超声无损检测及其调控(残余应力专场)
报告人:陈祯
单位:西安交通大学

75、报告题目:身管自紧力超声检测方法(残余应力专场)
报告人:毛月娟
单位:北方重工集团(兵器447厂)

76、报告题目:扭力轴加工残余应力检测与分析研究(残余应力专场)
报告人:李宏伟
单位:北京北方车辆集团有限公司(兵器618厂)

77、报告题目:无应力制造技术及发展趋势(残余应力专场)
报告人:徐春广
单位:北京理工大学

78、报告题目:油气管道残余应力导波调控技术(残余应力专场)
报告人:宋剑峰
单位:北京理工大学

79、报告题目:高铁铁轨焊接残余应力检测与调控技术(残余应力专场)
报告人:田海兵
单位:北京理工大学

80、报告题目:高铁列车轮对踏面残余应力原位检测与调控方法(残余应力专场)
报告人:吴凯
单位:北京理工大学

81、报告题目:轧制铝合金板材内部残余应力的声热调控方法(残余应力专场)
报告人:宋炜
单位:北京理工大学

82、报告题目:180度磁畴巴克豪森统计特性的应力表征及晶界的影响(高铁专场)
Title of the report:Statistical properties of Barkhausen Noise in 180o domain wall for stresscharacterization and grain boundary effects (SpecialHigh-speed Rail)
报告人:邱发生
Reporter: QiuFasheng  
单位:电子科技大学
UnitUESTC

83、报告题目:光激励锁相热成像激励电源的设计(红外专场)
Title of the report:A design of excitation source for the optically activated lock-in thermography(Special Infrared)
报告人:朱玉玉
Reporter: Zhu Yuyu
单位:电子科技大学
UnitUESTC

84、报告题目:多脉冲感应热成像检测铅钢材料内部脱粘缺陷(红外专场)
Title of the report:Multipulsed inductive thermography for inner disbond detection of lead-steelstructure (Special Infrared)
报告人:李晓希
Reporter: Li Xiaoxi
单位:电子科技大学
UnitUESTC

85、报告题目:基于贝叶斯网络的氧化锌避雷器在线监测方法研究(新能源专场)
Title of the report:Research on Online Monitoring of zinc oxide arrester Software Based on Bayesian Network (Special New Energy)
报告人:刘群英
Reporter: Liu Qunying
单位:电子科技大学
UnitUESTC

86、报告题目:基于区域生长法的复合材料脱粘缺陷的红外热成像检测(红外专场)
Title of the report:Seeded Region Growing Algorithm for Debonding Defects of CFRP for IT (SpecialInfrared)
报告人:冯琪智
Reporter:  Feng Qirui
单位:电子科技大学
UnitUESTC

87、报告题目:集成贝叶斯张量分解算法对脱粘缺陷的红外无损检测(红外专场)
Title of the report:Ensemble Bayesian Tensor Factorization for Debond Thermal NDT (Special Infrared)
报告人:鲁鹏
Reporter: Lu Peng
单位:电子科技大学
UnitUESTC

88、报告题目:基于经验值分解与重构X70管道电磁超声信号处理方法研究
Title of the report:EMD of EMAT NDT in X70 Pipeline Weld Defects
报告人:斯丹
Reporter: Si Dan
单位:电子科技大学
UnitUESTC

89、报告题目:探地雷达用于混凝土内含水量梯度的检测(新能源专场)
Title of the report:Determination of Water Content Gradients in Concrete with Ground PenetratingRadar (Special New Energy)
报告人:肖小汀
Reporter:Xiao  Xiaoting
单位:电子科技大学
UnitUESTC

90、报告题目:一种针对铅钢多层板的透射-远场复合检测方法
Title of the report:Hybrid RFEC and Transmission NDT for Detection of Lead-steel Multilayers
报告人:罗少蚺
Reporter:Luo Shaoran
单位:电子科技大学
UnitUESTC

91、报告题目:基于压缩感知的钢轨裂纹声发射信号采集技术(新能源专场)
Title of the report:The Acquisition of Acoustic Emission Signal of Rail Cracks based on CompressedSensing (Special New Energy)
报告人:严俨
Reporter: Yan Yan
单位:电子科技大学
UnitUESTC

92、报告题目:静电感应式热像检测(红外专场)
Title of the report:Electrostatic Induction Thermography (Special Infrared)
报告人:赵健
Reporter:Zhao Jian
单位:电子科技大学
UnitUESTC

93、报告题目:频域激光超声技术在航空材料力学强度检测中的应用(光声技术和超声检测专场)
报告人:高椿明
单位:电子科技大学

94、报告题目:WNS型锅炉直拉杆焊缝无损检测及风险分析
报告人:富阳
单位:广东省特种设备检测研究院中山检测院

95、报告题目:裂纹闭合及动态变化的激光超声监测研究
报告人:倪辰荫
单位:南京理工大学

96、报告题目:非线性激光超声用于早期牙微裂纹诊断的理论研究
报告人:袁玲
单位:南京理工大学

97、报告题目:基于磁滞的碳钢的塑性变形的影响机理对铁磁磁增量磁导率的信号
Title of the report:Influence mechanism of Plastic Deformation on Signals of Magnetic IncrementalPermeability for Ferromagnetic Carbon Steel Based on Hysteresis
报告人:李丽娟
Reporter:Li Lijuan
单位:西安交通大学
UnitXi'an Jiaotong University

98、报告题目:压力管道内除锈及视频检测机器人研究(机器人+专场)
报告人:杜兴吉
单位:浙江省特种设备检验研究院
摘要:在国内外管道机器人研究的基础上,针对压力管道内检测的应用要求,在对在役管道内壁超声波检测前,通常需要对管道内表面进行一定量的打磨,以提高声耦合效果,提出了携带打磨装置和视频检测装置的管道检测机器人。该机器人能够对口径为219mm的压力管道内表面实现自动打磨清理和检测。该机器人工作效率高,安全可靠,能缩短作业周期,降低劳动强度,提高检测精度和经济效益,具有较大的应用前景。
关键词:管道;内壁,打磨;检测;机器人

99、报告题目:大型承压设备爬壁机器人研究进展(机器人+专场)
报告人:凌张伟
单位:浙江省特种设备检验研究院
摘要:球罐、储罐等大型承压设备的打磨、检测等作业目前存在需要搭建脚手架、登高作业具有安全隐患以及作业环境恶劣等难题,采用爬壁机器人技术提升大型承压设备检测工作自动化水平一直是国内外该领域研究的重点方向。本文概述了国内外应用于大型承压设备作业的爬壁机器人的研究现状;介绍了该类机器人的结构及其特点;分析了打磨、超声测厚、磁粉检测等爬壁机器人研究中的技术难点;探讨了该类爬壁机器人发展与应用前景。
关键词:爬壁机器人,大型承压设备,打磨,检测

100、报告题目:用于压力管道检测的新的机器人系统(机器人+专场)
Title of the report:A New Robot-based System for In-pipe Inspection of Pressure Pipelines(Special Robot+)
报告人:钟海建
Reporter: ZhongHaijian
单位:浙江省特种设备检验研究院
UnitZhejiang Provincial Special Equipment Inspection and Research Institute
摘要AbstractAs pressurepipelines are usually mounted overhead or buried underground, the in-pipeinspection equipment that can run through inside the pressure pipelines isstrongly demanded. Currently, the application of robotic systems for in-pipeinspection of pressure pipelines is considered as one of the most attractivesolutions available. Therefore, in this work, a new robot-based system forin-pipe inspection of pressure pipelines is developed. A new defect detectionmethod for pressure pipelines, which is on the basis of the ultrasonic phasedarray technique, is presented. The developed system mainly includes threeparts: a tracked mobile robot for providing the driving force of the systemmovement, a camera used to photograph the inner surface videos or photos of thepressure pipelines and an ultrasonic phased array module for pipeline defectsdetection. With the robot-based system, the in-pipe inspection experiments ofpressure pipelines with inner diameter of 219 mm are also carried out. Theresearch results show that the robot-based system is effective. It cansuccessfully run through inside the pressure pipelines and can successfullyimplement the inner surface scanning and the defect detection of the pressure pipelines.The research results also indicate that the new defect detection method canimprove the defect detection effect of the pressure pipelines.
Keywordspressure pipeline, inner inspection, ultrasonicdetection, phased array technique, robots







欢迎光临 远东无损检测资讯网 (https://www.fendti.cn/) Powered by Discuz! X3.5