远东无损检测资讯网

标题: 五院院士JAN DREWES ACHENBACH担任2013远东论坛学术委员会主席 [打印本页]

作者: 远东网    时间: 2012-11-3 22:48
标题: 五院院士JAN DREWES ACHENBACH担任2013远东论坛学术委员会主席
五院院士,美国西北大学教授JAN DREWES ACHENBACH应邀担任2013远东论坛学术委员会主席
JAN DREWES ACHENBACH
Walter P. Murphy教授
McCormick 杰出学院教授
美国西北大学土木与机械工程系
基本信息
出生信息: 1935/8/20,荷兰莱瓦顿市
国籍:         USA (1978入籍)

教育经历
1953-1959 代尔夫特理工大学 主修:航空工程
1959-1962 斯坦福大学 主修:航空航天
副修:数学应用
学位
1962年获得斯坦福大学博士学位

学术生涯

1962-1963        哥伦比亚大学教师
1963-1966        西北大学土木工程助理教授
1966-1969        西北大学土木工程副教授
1969.4-l969.6        加利福尼亚圣地亚哥分校客座副教授
1969.9-l981.5        西北大学土木工程教授
1970.9-1971.4        代尔夫特理工大学客座教授
1981.5-        土木工程,环境工程,机械工程,工程科学和应用数学Walter P. Murphy教授
1985.9 -2006        西北大学质量工程及事故预防中心主任
l992.9-        西北大学杰出的McCormick School教授


主要学术职位
1982        美国国家工程院        院士
1992        美国国家科学院        院士
1994        美国艺术与科学研究院        院士
1999        荷兰皇家艺术与科学院        院士
2010        韩国科学院        荣誉院士
1973 美国科学院力学        会员
1979        美国机械工程师协会        会员
1988        日本学术振兴会        会员
1998        美国科学促进协会        会员
1998        美国声学协会        会员
2002        美国工程科学学会        会员
2002 美国机械工程师协会        荣誉会员

其他学术职位
l981.9 -        中国 华中科技大学        咨询教授
2011.9-        中国 浙江大学        名誉博士

主要奖项
2005        美国国家科学奖(美国政府颁发最高科技奖励)
2003 美国国家技术奖(美国政府颁发最高科技奖励)
1992 美国机械工程师协会 Timoshenko奖(国际应用力学领域的诺贝尔奖)
2006 SPIE(国际光学工程学会)国际研讨会 无损检测最佳论文奖
2005 SPIE(国际光学工程学会)会议 NDE终身成就奖
2004 美国无损检测学会 教程引文奖
2003        计算与实验科学工程国际会议奖
2002        美国无损检测学会 优秀论文奖
2001        美国工程科学学会William Prager奖章
1996        麦克唐纳•道格拉斯模型卓越奖
1975        美国工程教育学会 柯蒂斯•麦格劳研究奖

学术编辑
2003-2005 国家科学院 编委会成员
1994-1998 复合材料力学与结构 特约编辑
1989- 无损评估研究 编委会成员
1989- 无损评估期刊 编委会成员
1988-1998 固体力学学报 国际顾问编委会成员
1982 – 荷兰应用数学和力学系 编委会成员
1982-1983 应用力学学报 副主编
1982-1983 应用力学学报第五十期发行 编辑委员会主席
1980-        力学与数学方法手册(北荷兰出版公司)总编辑
1979-        WAVE MOTION期刊(一个关于波动研究报告的国际期刊)总编辑
1978-2003        《热应力研究》期刊 编委会成员
1971-1996        《固体与结构研究》期刊 编委会成员
1971-1976        《应用力学学报》 副主编
1970-        《弹性学》 编辑咨询委员会成员
1969-1970        《固体与结构》杂志 代理编辑

主要委员会
2000-        国际联盟理论与应用力学 评选委员会主席
1997-2000 美国国家工程院 委员会的成员
1996 第14届国际无损检测会议 国际咨询委员会
1995-1997 美国国家工程院 机械工程委员会议员
1994 美国国家科学院 第三类会员资格委员会
1994-1998 国家材料咨询委员会
1994-1998 美国科学促进协会
1992-1998 美国国家标准与技术研究院 制造工程审查小组
1988-1994        提名美国机械工程师学会会员 审查委员会
1987-1989 美国机械工程师学会主席
1972-1978 美国国家委员会 理论与应用力学
1986- 美国国家委员会 理论与应用力学
1984-1994 国际联盟理论与应用力学国会委员会
1979-1985 美国机械工程师学会应用力学部 执行委员会
1978-1979 美国科学院力学 主席
1971-1973 力学协会 主席

研究领域
在过去的35年时间里,Achenbach教授已经在超声领域做出了自己的贡献,特别是应用于定量无损评估。以下介绍Achenbach教授的七个方面的成就:
1.超声显微镜
2.定量超声的实际应用
3.激光超声
4.衍射系数
5.复合材料的动态行为
6.动态断裂
7.弹性动力学

教育生涯
Achenbach教授培养博士学生不计其数,多数学生活跃在世界学术界,其中有多位已成为世界知名学者,在国内外学术界和工业界中占据了重要的职位。1993年Achenbach教授被选加入芝加哥论坛的教授团。他写的最重要一本书Wave Propagation in Elastic Solids,1973年由阿姆斯特丹科学有限公司出版,这是自Kolsky的研究以来第一本书对弹性波理论著作的出版,是关于弹性波理论介绍最权威的参考书。同时,Achenbach教授任世界著名学术杂志“Wave Motion”(SCI影响因子:1.391)的主编,在国际高水平学术刊物及国际会议上发表论文350余篇。他还是国际上波动学和无损检测技术等方面的顶级权威学者,(曾)任多个国际知名期刊的主编、副主编、编委。

出版物:
主要著作
1.        Wave Propagation in Elastic Solids, North-Holland Publishing Company/American Elsevier, Amsterdam/New York, 1973.
2.        A Theory of Elasticity with Microstructure for Directionally Reinforced Composites, CISM Monograph 167, Springer Verlag, Vienna/New York, 1975.
3.        Ray Methods for Waves in Elastic Solids – with Applications to Scattering by Cracks, (with A. K. Gautesen and H. McMaken), Pitman Advanced Publishing Program, Boston/London/Melbourne, 1982.
4.        Reciprocity in Elastodynamics, Cambridge University Press, Cambridge, UK, 2003.

主要论文列表
1.        “Dynamic Interaction of a Layer and a Half-Space,” J. of the Engr. Mechs. Div. ASCE, 93, pp. 27-42, 1967. (with H. I. Epstein).
2.        “Continuum Theory for a Laminated Medium,” J. of Applied Mech., 35, pp. 467-475, 1968. (with C. T. Sun and G. Herrmann).
3.        “Dynamic Effects in Brittle Fracture,” in Mechanics Today, 1, ed. by S. Nemat-Nasser, Pergamon Press, Oxford, UK, pp. 1-57, 1974.
4.        “Geometrical Theory of Diffraction for Three-D Elastodynamics,” J. Acoust. Soc. Am., 61, pp. 413-421, 1977. (with A. K. Gautesen).
5.        “Diffraction of Ultrasonic Waves by Penny-Shaped Cracks in Metals: Theory and Experiment,” J. Acoust. Soc. Am., 66, pp. 1848-1856, 1979. (with L. Adler, D. Kent Lewis and H. McMaken).
6.        “A New Boundary Integral Equation Formulation for Elastodynamic and Elastostatic Crack Analysis,” J. of Appl. Mech., 111, pp. 284-290, 1989. (with Ch. Zhang).
7.        “Effect of Interfacial Zone on Mechanical Behavior and Failure of Fiber-Reinforced Composites,” J. Mech. Phys. Solids, 37, pp. 381-393, 1989. (with H. Zhu)
8.        “Dual-Probe Laser Interferometer,” J. Acoust. Soc. Am., 90, pp. 1269-1274, 1991. (with J. Huang)
9.        “Line-Focus Acoustic Microscopy to Measure Anisotropic Acoustic Properties of Thin Films,” Thin Films, 214, pp. 25-34, 1992. (with J. O. Kim).
10.        “Laser-Generation of Narrow-Band Surface Waves,” J. Acoust. Soc. Am., 92, pp. 2527-2531, 1992. (with J. Huang and S. Krishnaswamy).
11.        “Self-Calibrating Ultrasonic Technique for Crack Depth Measurement,” J. of Nondestr. Eval., 11, pp. 103-108, 1992. (with I. N. Komsky, Y. C. Lee and Y. C. Angel).
12.        “Measurement Models for Quantitative Ultrasonics,” J. Sound and Vibration, 159, pp.
13.        385-401, 1992.
14.        “Elastodynamic Fundamental Solutions for Anisotropic Solids,” Geophys. J. Int., 118, pp. 384-392, 1994. (with C. Y. Wang).
15.        “Measuring Thin-Film Elastic Constants by Line-Focus Acoustic Microscopy,” Advances in Acoustic Microscopy, ed. by Andrew Briggs, 1, pp. 153-208, 1995. (with J. Kim and Y.-C. Lee).
16.        “An Ultrasonic Technique to Detect Corrosion in DC-9 Wing Box: From Concept to Field Application,” Materials Evaluation, 52, pp. 848-852, 1995. (with I. N. Komsky, G. Andrew, B. Grills, J. Register, G. Linkert, G. Huerto, A. Steinberg, M. Asbaugh, D. Moore, and H. Weber).
17.        “Fatigue Crack Initiation and Growth in Riveted Specimens: An Optical and Acoustic Microscopic Study,” Int. J. Fatigue, 19, Supplement 1, pp. S331-S338, 1997. (with Z. M. Connor, W. Li, and M. E. Fine).
18.        “Compact Phase-Shifted Sagnac Interferometer for Ultrasound Detection,” Optics & Laser Technology, 29, pp. 333-338, 1997. (with P. A. Fomitchov and S. Krishnaswamy).
19.        “Laser Ultrasonic Detection of Surface-Breaking Discontinuities: Scanning Laser Source Technique,” Materials Evaluation, 58, pp. 173-177, 2000. (with A. K. Kromine, P. A. Fomitchov, and S. Krishnaswamy).
20.        “Calculation of Surface Wave Motions Due to a Subsurface Point Force: An Application of Elastodynamic Reciprocity,” J. Acoust. Soc. Am., 107, pp. 1892-1897, 2000.
21.        “Case Study for the Implementation of an Automated Ultrasonic Technique to Detect Fatigue Cracks in Aircraft Weep Holes,” Materials Evaluation, 59, pp. 1313-1319, 2001. (with J. Aldrin, G. Andrew, C. Pan, B. Grills, R. T. Mullis, F. W. Spencer and M. Golis).
22.        “Laser Excitation of Surface Wave Motion,” J. Mech. Phys. Solids, 51, pp. 1885-1902, 2003.
23.        “Simplifications for the calculation of surface wave pulses generated by laser irradiation,” J. Acoust. Soc. Am., 116, pp.1481-1487, 2004.
24.        “The Thermoelasticity of Laser-Based Ultrasonics,” J. of Thermal Stresses, 28, pp. 713-728, 2005.
25.        “Combination of a Virtual Wave and the Reciprocity Theorem to Analyze Surface Wave Generation on a Transversely Isotropic Solid,” Philosophical Magazine, 85, pp. 4143-4157, 2005.
26.        “Reciprocity and Related Topics in Elastodynamics,” Applied Mechanics Reviews, 59, pp. 13-32, 2006.
27.        “A Probabilistic Method to Predict Fatigue Crack Initiation,” Int. J. of Fracture, 137, pp. 9-17, 2006. (with S.S. Kulkarni, L. Sun, B. Moran and S. Krishnaswamy)
附件:
1.        成果概况:

图1 标志性成果汇总
2.        获美国国家科学奖(2005)、美国国家技术奖(2003)

图2美国国家科学奖和国家技术奖奖章及证书

图3 2005年获国家科学奖接受美国总统乔治布什颁奖
3.        代表性著作
1)        (1973). Wave propagation in elastic solids. North-Holland Series in Applied Mathematics and Mechanics. North-Holland. ISBN 0-7204-0325-1.


2)         (2003). Reciprocity in Elastodynamics. Cambridge University Press. ISBN 978-0-521-81734-9


4.        创办的国际一流杂志Wave Motion
Since the journal's establishment in 1979, the editor in chief has been Jan D. Achenbach

5.        相关内容可参考以下网站:
http://en.wikipedia.org/wiki/Jan_D._Achenbach
作者: fgh222    时间: 2016-1-26 20:28
看看了                                                               





欢迎光临 远东无损检测资讯网 (https://www.fendti.cn/) Powered by Discuz! X3.5